Process Signal to Frequency/Pulse Converter

• Convert a variety of process signals to pulses.
• Inputs from mV, mA, A to pulse inputs.
• Output frequencies anywhere from 0.01 Hz through to 100 kHz.
• Transistor or relay output which can be configured to be either normally open or normally closed.
• Multiple output configurations to choose from.
• Selectable pulse width output.
• Output can be frequency or pulse width.
• LED input and output indication.

Specifications:

• Input signal ranges: ±50 mV, 0-1 V, 0-10 V, 0-100 V, 0-250 V, ±10 V, ±100 V, and ±1 mA, 4-20 mA, 0-20 mA,
  0-1 A, 0-5 A, DC or AC. Resistance 0-100 Ω up 10 kΩ.
• Frequency up to 100 kHz.
• Input impedance of >250 kΩ for the voltage input and 50 Ω or less for the current input models.
• Potential free relay contact, transistor or various voltage outputs.
• Relay contact rating 125 VAC/0.6A, 110 VDC/0.6A or 30 VDC up to 2 A resistive load.
• Output frequencies from 0.01 Hz to 100 kHz.
• Customised input and output ranges on request.
• Input supply 24, 12 VDC ±10% or 22 to 30 VDC.
• Isolation between input, output and supply >1000 VDC.
• Selectable filtering options up to 60 seconds.
• Zero and span trimpots can be locked or disabled using a DIP switch.
• Wide or normal zero and span adjustment selection using a DIP switch.
• Step response approximately 10 mS with filter off.
• Linearity better than 0.5% of full scale.
• Operating temperature -10°C to 70°C.
• DIN rail mounting with dimensions 25 x 80 x 85 mm (W x H x D).